The Switch Summary tab displays basic switch information. This information-only display
derives from the configuration tab Edit, Chassis, Chassis.
Following is a list of the fields on the Switch Summary tab:
• hardware model
• hardware version
• firmware version
• software version
• system uptime
• system object identifier
• system contact
• system name
• system location
A Stack Information panel appears at the bottom of the switch summary view work area that
provides a description of your switch or the units in your switch stack.
This information includes the following:
• Unit number (for stacks) – also lists which unit is the base unit in a stack
• Switch type
• Description
• Running software version
Device Physical View
When you access EDM, the first panel in the work area displays a switch summary view. The
tab behind the summary view is a real-time physical view of the front panel of a device or stack
called the Device Physical View.
Objects in the Device Physical View are
• a stand-alone switch, called a unit
• a switch stack, called a chassis
• a port
From the Device Physical View you can
• determine the hardware operating status
• select a switch or a port to perform management tasks on specific objects or view fault,
configuration, and performance information for specific objects
Enterprise Device Manager fundamentals
20 Fundamentals of ERS 3500 Series March 2014
Comments? infodev@avaya.com
To Next Page
Loading...
