• 3 toolbar—the area just below the menu bar that provides quick access to the most
common operational commands such as Apply, Refresh, and Help
• 4 work area—the main area on the right side of the window that displays the dialog boxes
where you view or configure switch parameters
Figure 2: EDM window
Navigation tree
The navigation tree displays available command topics as folders in a tree, as described in the
table below.
Table 2: Folders and subfolders in the navigation tree
Folder Description
Administration Use the selections in the Administration folder to perform the
following functions:
• Quick Start — sets up IP/Community/VLAN
• Remote Access — enables or disables Telnet, SNMP,
Web Page, and SSH
• MIB Web Page — performs a MIB Walk
Device Rediscover Device — Use the Rediscover Device selection
to refresh the session.
Caution:
All existing tabs are lost.
Enterprise Device Manager fundamentals
22 Fundamentals of ERS 3500 Series March 2014
Comments? infodev@avaya.com
To Next Page
Loading...
