Avaya ERS 3500 Series - Editing an Object Using the Shortcut Menu; Editing File System Elements

Editing an object using the shortcut menu
You can edit objects in the Device Physical View from the navigation tree or the shortcut menu.
Use this procedure to edit an object using the shortcut menu.
About this task
Changes are not applied to the running configuration until you click Apply.
Procedure
1. On the Device Physical View, you can
• right click an object
• press Ctrl+click to select several objects, then right click
• click and drag to select a group of objects, then right click
• click an entire device, then right click
2. From the list, click Edit.
3. Edit the applicable tab in the work area.
4. Click Apply.
Editing file system elements
Use this procedure to edit file system elements.
Procedure
1. Click the Edit arrowhead to open the Edit menu.
2. Double-click File System to open the File System tab in the work area.
Editing an object using the shortcut menu
Fundamentals of ERS 3500 Series March 2014 41