Multiple Port Configuration for EDM
When you need to apply the same configuration changes to more than one port, you can use
the Multiple Port Configuration function available on all tabs in the Edit, Chassis, Ports work
flow, or on port-related tabs for specific, applicable feature work areas (for example, VLAN,
VLANs, Ports).
The following sections use the Edit, Chassis, Ports, Interface tab work area to describe the
available Multiple Port Configuration functions.
In the work area for any of the Edit, Chassis, Ports tabs, the following two panes appear in the
default view:
• Multiple Port Configuration pane—provides port selection for one port, several ports, or
all ports, and configurable port parameters
• Tab work pane—displays existing configuration information for the feature and
configurable cells for individual ports
With Multiple Port Configuration you can perform the following:
• Hide non-editable fields from the multiple configuration pane so that you choose to view
only those fields that can be configured.
• Select an individual port or a group of ports from the Port Editor.
• Select all ports from the Port Editor.
• Double-click any or all of the editable fields to change the configuration parameter.
• Clear your selections.
• Apply your selections.
• Undo the application of your selections.
You can expand or collapse the Multiple Port Configuration pane by clicking the Multiple Port
Configuration task bar. The Multiple Port Configuration pane is expanded by default.
The following figure displays the tabs available in the Edit, Chassis, Ports work flow, with the
Interface tab selected and the Multiple Port Configuration pane expanded.
Interface components
Fundamentals of ERS 3500 Series March 2014 31
To Next Page
Loading...
