Figure 12: Interface tab — Multiple Port Configuration pane expanded
The following figure displays the Edit, Chassis, Ports, Interface tab with the Multiple Port
Configuration pane collapsed.
Figure 13: Interface tab — Multiple Port Configuration pane collapsed
Changes you make to a port configuration using Multiple Port Configuration are applied to the
switch configuration only after you click Apply on the work area toolbar.
The following figure displays the location of the Apply button on the work area toolbar.
Figure 14: Toolbar Apply button
Enterprise Device Manager fundamentals
32 Fundamentals of ERS 3500 Series March 2014
Comments? infodev@avaya.com
To Next Page
Loading...
