File System work area field descriptions
The following table describes the tabs in the File System work area.
Tab Description
Config/Image/Diag file Use this tab to view information about and
acquire image, configuration, and firmware
files.
Ascii Config File Use this tab to acquire ASCII configuration
files.
Save Configuration Use this tab to save the current configuration
manually or automatically.
Configuring multiple interface ports using EDM - Example
1
Use this procedure as an example for configuring multiple interface ports using the Multiple
Port Configuration function and the Edit, Chassis, Ports, Interface work flow.
Before you begin
• Select ports on the Device Physical View.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, double-click Chassis.
3. In the Chassis tree, click Ports.
4. Click the Interface tab.
5. To change the configuration of the selected ports, in the Multiple Port Configuration
pane, double-click the cell beneath the column heading that represents the
parameter you want to change and do one of the following:
• Select a value from a drop-down list.
• Type a value in the cell.
6. In the Make Selection pane, click Apply Selection. The changes appear in the
table.
Enterprise Device Manager procedures
42 Fundamentals of ERS 3500 Series March 2014
Comments? infodev@avaya.com
To Next Page
Loading...
