To access a command tab, double-click the selection in the navigation tree.
Navigation tree toolbar
You can use the toolbar above the navigation tree to perform common functions more
easily.
Toolbar:
Figure 3: Toolbar
Following is a description of the toolbar button functions:
Button Description
Switch Summary – you can use the Switch Summary toolbar button to
open or reopen the switch summary tab
Refresh Status – in addition to the existing refresh methods you can use
the Refresh Status toolbar button to refresh the device status
Edit Selected – in addition to the existing edit methods, and depending
on which object you select on the Device Physical View, you can use this
toolbar button to open Edit > Chassis, Edit > Unit, or Edit > Ports tabs. If
you do not select an object from the Device Physical View and you click
the Edit Select toolbar button, the Edit > Chassis tab opens.
Graph Selected – depending on which object you select on the Device
Physical View, you can use this toolbar button to open Graph > Chassis
or Graph > Port tabs. If you do not make a selection on the Device
Physical View, or if you select Unit, the Graph > Chassis tab opens.
Save Config — this button allows you to save the current configuration.
A window appears asking if you want to save the configuration: click OK
to save the configuration or click Cancel to cancel the Save operation.
Help Setup Guide – this button connects you to the help setup guide for
embedded EDM and it replaces the link that appeared on the top right of
work panes.
Under the toolbar is the Search function window. You can use the Search function window to
find a specific sub-folder or selection in the navigation tree.
Figure 4: Search function window
Interface components
Fundamentals of ERS 3500 Series March 2014 25
To Next Page
Loading...
