Avaya ERS 3500 Series - Page 35

Variable definitions
The following table describes the parameters for the help-file-path command.
Variable Value
path name Specifies the path name you created for EDM files. The path
name is stored in NVRAM.
TFTP address Specifies EDM TFTP server IP address. Use this address
only for EDM help files. If you do not specify a TFTP server
address, the system uses the address specified most
recently.
Warning:
The TFTP server address is stored in NVRAM, therefore
each time the system returns to the default configuration,
you must reconfigure the path to EDM online help.
Configuring the path to the help files using ACLI
Fundamentals of ERS 3500 Series March 2014 35