Country and plug description Specifications Typical plug
United Kingdom
• BS1363 male plug with fuse
• Harmonized cord
240 VAC
50 Hz
Single phase
Australia
AS3112-1981 male plug
240 VAC
50 Hz
Single phase
The Ethernet Routing Switch 3500 series does not have a power switch. When you connect the AC power
cord to a suitable AC power outlet, the switch powers up immediately.
Connect the AC power cord to the back of the switch, and then connect the cord to a power outlet.
Figure 22: Connecting the AC power cord to the Ethernet Routing Switch 3500 Series
ERS 3510 Series Mounting
The following figures illustrate the 3510GT/3510GT-PWR+ series table and wall mounting accessories.
Ethernet Routing Switch 3500 Series hardware illustrations
68 Fundamentals of ERS 3500 Series March 2014
Comments? infodev@avaya.com
To Next Page
Loading...
