Avaya H175 - Setting up and Starting a Conference

Note:
In survivability mode, only Hold and End Call controls are active. Tap and hold the contact card
to see the audio statistics during an active conference.
Related links
Conferencing on page 110
Communication containers on page 29
Setting up and starting a conference
About this task
You can set up an audio or a video conference call with Avaya Scopia
®
and Avaya Aura
®
Conferencing.
If you start a conference call, you become the moderator of the conference. As a moderator, you
can control the conference features, such as locking the conference and muting all participants.
Procedure
1. Go to the Communication screen.
2. Add contacts in the new call container by performing one of the following actions:
• Drag and drop participants from the Contacts list, Favorites list, or Recents list by tapping
Contacts, Favorites, or History in the Launch Panel.
• Enter numbers through the hard dial pad or by tapping Dial in the Launch Panel.
3. Tap the Audio Call or Video Call control.
Related links
Conferencing on page 110
Conferencing
April 2016 Using Avaya H175 Video Collaboration Station 112
Comments on this document? infodev@avaya.com