Avaya H175 - Whisper Page; Sending a Whisper Page

Related links
Call management on page 64
Whisper Page on page 76
Sending a whisper page on page 76
Blocking and unblocking your caller information on page 77
Calling an intercom group member on page 77
Making a priority call on page 78
Unparking a call on page 78
Whisper Page
Use Whisper Page to interrupt a call for making an announcement to a contact. When you use
Whisper Page:
• Only the paged contact can hear you. Other participants cannot hear you, and you also cannot
hear them. However, other participants on the call hear the whisper page notification tone.
• If a paged contact is not in a call, the Collaboration Station converts the whisper page to a
priority call that overrides any active call redirection feature.
• If a paged contact is in a call, the active call container of the contact becomes a whisper page
container.
• If a paged contact call is on the speaker, the Collaboration Station plays the whisper message
on the speaker.
• Participants on bridged appearances of the paged contact hear the whisper page notification,
but only the paged contact hears the announcement.
Related links
Precall operations on page 75
Sending a whisper page on page 76
Sending a whisper page
Procedure
1. Go to the Communication screen.
2. Tap New Conversation.
3. Tap Precall Features.
4. Tap Whisper Page.
5. Enter the number of the contact.
6. Tap Audio Call if you are in the manual dial mode, or wait for the Collaboration Station to
start the call.
Call management
April 2016 Using Avaya H175 Video Collaboration Station 76
Comments on this document? infodev@avaya.com