Avaya H175 - Blocking and Unblocking Your Caller Information; Calling an Intercom Group Member

Related links
Precall operations on page 75
Whisper Page on page 76
Blocking and unblocking your caller information
About this task
By default, the Collaboration Station displays your name and number to the called person during
outgoing calls. Use Block Calling Party Info to prevent the information display for a particular call.
The administrator can also configure the Collaboration Station to prevent the information display for
all outgoing calls. In this case, use Unblock Calling Party Info to display the information for a
particular call.
Procedure
1. Go to the Communication screen.
2. Tap New Conversation.
3. Tap Precall Features.
4. Perform one of the following actions:
• To block the information display, tap Block Calling Party Info..
The Collaboration Station displays the message Your Caller Id will be blocked.
• To unblock the information display, tap Unblock Calling Party Info..
Related links
Precall operations on page 75
Calling an intercom group member
About this task
If you are a part of an intercom group, you can use:
• Auto Intercom to call a specific person in the intercom group with a dedicated one-touch dial
option.
• Dial Intercom to call any person in the intercom group with a dial code number that the
administrator assigned to that person.
Procedure
• To make a call to a specific person in an intercom group:
1. Go to the Communication screen.
2. Tap New Conversation.
3. Tap Precall Features.
Precall operations
April 2016 Using Avaya H175 Video Collaboration Station 77
Comments on this document? infodev@avaya.com