Avaya H175 - Mounting and Connecting the Camera

External mount
The camera can be mounted on an external monitor so that the user can view the video calls on the
connected monitor. The following image shows the camera mounted on an external monitor.
Related links
Camera on page 60
Mounting and connecting the camera
Procedure
• For integrated mount:
1. Position the camera on the Collaboration Station.
2. Fold the camera leg and insert the camera latch in the twist lock at the back of the
Collaboration Station.
3. Plug one end of the camera cable into the camera connector of the Collaboration Station.
Plug the other end into the connector in the camera.
Setting up H175 Video Collaboration Station
April 2016 Using Avaya H175 Video Collaboration Station 62
Comments on this document? infodev@avaya.com