Chapter 3: Setting up H175 Video
Collaboration Station
Hardware setup and login
This section describes the components of the Collaboration Station and how to assemble the
components and log in to the device.
Related links
Packaged components on page 45
Physical layout on page 46
Connectors and controls on page 47
Connecting the Collaboration Station to the network on page 49
Connecting a wired handset on page 49
Mounting and connecting the camera on page 50
Logging in and logging out on page 51
Locking and unlocking on page 51
Tilting the display on page 51
Packaged components
Ensure that the package contains the following parts:
• The Collaboration Station base
• Wireless handset
• Two AAA rechargeable batteries
• Ethernet cable
• Camera
• 2-meter USB cable
The camera and USB cable are packaged in a separate box.
The package might also contain the following optional components:
• Wired handset with a handset cord
• Charging pins cover
You might also get a package of an AC power adapter and cord if you ordered one for the device.
April 2016 Using Avaya H175 Video Collaboration Station 45
Comments on this document? infodev@avaya.com
To Next Page
Loading...
