Avaya H175 - Installing the Wireless Handset; Enabling and Disabling the Wireless Handset Usage

Number Name
3 Volume down
4 Battery slot
5 Charging pins
6 Mute LED
7 Call control
Related links
Wireless handset on page 52
Installing the wireless handset
Before you begin
Ensure that the administrator configured the country settings and enabled the DECT menu option
for the wireless handset. Once you have installed the wireless handset, the batteries will take
around 16 hours to get fully charged for the first time.
Procedure
1. Install the batteries in the battery slot by matching the poles as shown in the slot label.
Danger:
There is a risk of explosion if you use an incorrect type of battery.
2. Put the wireless handset in the cradle.
The Collaboration Station displays the battery level and the pairing information in the Top
Bar.
Related links
Wireless handset on page 52
Enabling and disabling the wireless handset usage
About this task
You can enable or disable the wireless handset usage only if your administrator configured the
option for you.
Procedure
1. Go to the Settings screen.
2. Perform one of the following actions:
• To enable the wireless handset usage, tap WIRELESS & NETWORKS > DECT > ON.
• To disable the wireless handset usage, tap WIRELESS & NETWORKS > DECT > OFF.
Setting up H175 Video Collaboration Station
April 2016 Using Avaya H175 Video Collaboration Station 54
Comments on this document? infodev@avaya.com