Avaya H239 - Line Tab; SIP Page

3. In OpenVPN Files, click Upload to upload the authentication and configuration files.
4. In VPN Mode, select the Enable VPN check box.
5. Select the Open VPN check box.
6. Click Apply.
Line tab
The following sections describe the options that you can access from the Line tab.
SIP page
To access this page, click the Line tab and then click SIP.
The following table describes SIP parameters to be configured for the Avaya H239 and H249
phones:
Option Description Option Description
Basic settings
Line Status Current line status at
page loading. You must
refresh the page
manually to get the up to
date line status.
SIP Proxy Server
Address
IP address or FQDN of
the SIP proxy server.
Username User name of the service
account.
SIP Proxy Server Port SIP proxy server port.
The default is 5060.
Display Name Display name to be sent
in a call request.
Backup Proxy Server
Address
IP address or FQDN of
the Backup proxy server
Authentication Name Authentication name of
the service account.
Backup Proxy Server
Port
The port for the backup
proxy server.
Authentication
Password
Authentication password
of the service account.
Outbound Proxy Add. IP or FQDN address of
outbound proxy server
provided by the service
provider.
Outbound Proxy Port Outbound proxy port. The default is 5060.
Table continues…
Web portal navigation
October 2019 Installing and Administering the Avaya H239 and H249 Phones 22
Comments on this document? infodev@avaya.com