For example: If you set the Update Interval to 1 hour, then the phone automatically
checks the configuration file for updates every hour.
f. Click Apply when you are ready to apply your changes.
3. Open the configuration file.
4. In the AUTOUPDATE CONFIG MODULE section of the configuration file template, set PNP
Interval to 1.
5. Upload the configuration file on the file server.
Related links
Managing phone reboots on page 48
Managing phone reboots
About this task
By default, the phone reboots every time the upgrade file is updated. Use this procedure if you do
not want the phone to reboot after every update. When you perform this procedure, the phone
only reboots after a major configuration change. If you update the configuration file during a call,
the change takes effect after the call ends.
Procedure
1. Open the configuration file template that you downloaded from the
Avaya Support website.
2. In the AUTOUPDATE CONFIG MODULE section, add the following line:
CFG Update Realtime:1
3. Save your changes and upload the file to the file server.
Phone settings configuration and management
October 2019 Installing and Administering the Avaya H239 and H249 Phones 48
Comments on this document? infodev@avaya.com
To Next Page
