Procedure
1. On the web portal, navigate to Phone settings > Advanced.
2. In the Hotel General Info section, do the following:
• In the Address field, enter the address of the hotel. The address must be from 0 to 200
characters.
• In the Tel/Others field, enter telephone number and other information. The information
must be from 0 to 130 characters.
3. (Optional) The Format option allows you to set the alignment of the text. Choose L for left
alignment, M for the center alignment, and R for the right alignment.
4. (Optional) The Font option allows you to set the text font size. Choose L for large, M for
medium, and S for small font size.
Note:
If you are using the medium (M) or large (L) font size, any text over two lines long will
be truncated.
Configuring function keys
About this task
You can configure the function keys on the phone manually by logging in to the web portal. You
can configure the key name that will be displayed on the phone screen, extension number
assigned to the key, and subtype of the key. You can configure the keys in any random sequence.
You can configure the following attributes of the function keys:
• Key name that will be displayed on the phone screen
• Extension number assigned to the key
• Subtype of the key
Procedure
1. On the web portal, click Function key.
2. To configure DSS Key 1–1, do the following:
a. In the Type field, click Memory Key.
b. In the Name field, enter a title for the key to display on the phone screen..
For example, if you want to assign function key 1 to the reception, type Reception.
c. In the Value field, enter the extension number that you want to assign to the key.
Value field cannot be empty. You must add extension number to save the changes.
d. In the Subtype field, click Speed Dial.
Configuring function keys
October 2019 Installing and Administering the Avaya H239 and H249 Phones 53
Comments on this document? infodev@avaya.com
To Next Page
