Avaya H239 - Page 34

Option Description
Enable Password Dial Use this check box to
enable password dialing.
When the number
entered begins with the
password prefix, the
following N numbers
after the password prefix
will be hidden as *. N
stand for the value which
you enter in the
Password Length field.
For example, if you set
the password prefix as 3
and enter 2 in the
Password Length ,
when you enter the
number 34567, it will
display 3**67 on the
screen.
Busy Response Code Use this option to set the
SIP response code on
line busy.
Password Dial Prefix Use this option to set the prefix of the password call number.
Enable Phone DND Use this check box to
enable phone DND.
Encryption Number
Length
Use this option to set the
encryption number
length. The value must
be from 0 to 31.
Restrict Active URI
Source IP
Use this option to set IP
address from which the
device accepts active
URI command.
Push XML Server Use this option to set the
push XML server. When
the phone receives
request, it determines
whether to display the
content sent by the
specified server.
Allow IP Call Use this check box to enable dialing out with IP
address.
Play Dialing DTMF Tone Use this check box to enable playing DTMF tone
when the user presses keys at dialing. By default, it
is enabled.
Enable Default Line If enabled , user can assign default line to other
SIP1Line. By default, it is disabled.
Play Talking DTMF Tone Use this check box to enable playing DTMF tone
when the user presses keys during taking. By
default, it is enabled.
Enable Code Plan By default, it is disabled.
Enable holding Tone By default, it is enabled.
Web portal navigation
October 2019 Installing and Administering the Avaya H239 and H249 Phones 34
Comments on this document? infodev@avaya.com