Avaya H239 - Page 8

Issue Date Summary of changes
Issue 2 September 2018 • Updated Checking IP address information on page 13.
• Updated Configuring the phone using the DHCP or static
provisioning server on page 46.
• Updated Configuring automatic phone provisioning on page 42.
• Added Avaya Aura configuration for failover on page 13.
• Updated SIP page on page 22.
• Minor rephrasing in Features page on page 32.
• Updated Audio page on page 35.
• Updated Advanced page on page 38.
• Added a note about the H249 screen display in Configuring the
customizable function keys on page 40.
• Added Greeting Words parameter in the configuration file causes
the web administration portal to get stuck and the H249 phone to
reboot on page 57.
• Added The hotline feature does not work when the H249 phone is
in screen saver mode on page 57.
• Added Cannot receive incoming calls after failover occurs on
page 57.
Issue 3 October 2019 • Added Dimensions on page 10.
• Updated Checking IP address information on page 13.
• Moved Web portal navigation on page 15 to a separate chapter.
• Updated Configurations page on page 17.
• Added Enabling watch dog on page 18.
• Added Enabling syslog on page 18.
• Added Service port page on page 19.
• Updated Features page on page 32.
• Added Configuring alert info ring settings on page 36.
• Added Device certificates page on page 39.
• Updated Configuring automatic phone provisioning on page 42.
• Added Configuring automatic provisioning for phone display
background image and icons on page 44.
• Added Configuring phone provisioning by using Plug and Play on
page 47.
• Added Managing phone reboots on page 48.
• Added Avaya H249 phone screen customization on page 49.
Introduction
October 2019 Installing and Administering the Avaya H239 and H249 Phones 8
Comments on this document? infodev@avaya.com