Avaya one-X - Viewing Network Information

Procedure
1. Double-click the Avaya one-X Communicator Suite.exe file to run the Avaya one-X
®
Communicator suite in the maintenance mode.
2. Click Repair .
3. After the repairing is finished, click Finish to exit the wizard.
Modifying Avaya one-X
®
Communicator
Before you begin
Ensure that you close Avaya one-X
®
Communicator.
About this task
When you modify Avaya one-X
®
Communicator, you can perform one of the following:
• Install a package that was not installed at the initial installation.
• Remove the installed packages.
Procedure
1. Double-click the Avaya one-X Communicator Suite.exe file to run the Avaya one-X
®
Communicator suite in maintenance mode.
2. In the Program Maintenance window, click Modify .
3. In the Custom Setup window, select the program feature to install, and click Install .
Note:
The Avaya one-X
®
Communicator suite removes the installed program features that are not
selected.
4. After the modification is finished, click Finish to exit the wizard.
Setting up Avaya one-X
®
Communicator
14 Implementing Avaya one-X
®
Communicator April 2015
Comments? infodev@avaya.com