Field name Description
Block This Phone The button to remove the mobile phone from your
account.
Configuring instant messaging and presence settings
Using this window, you can activate the Avaya one-X
®
Communicator Instant Messaging
functionality.
Procedure
1. Click IM and Presence in the left pane of the General Settings window.
2. To enable IM and Presence, select the Enable Instant Messaging and Presence check
box.
3. In the Server field, enter the IP address of IM and Presence server.
4. In the Domain field, enter the domain name of the Presence server.
5. Perform any one of the following actions:
• For SIP protocol, select the Automatically discover my IM login information option.
• For H.323 protocol, select the Manually specify my IM login information and enter the
IM username and IM password in the respective fields.
6. To store instant messages on your hard disk drive, select the Enable Local Message
Archiving check box.
7. Click the Preferences tab and select the options as appropriate.
Note:
The check box, Activate the "Send all calls” feature (if available) when presence is set
to ”Do not disturb”, is open for selection only if the feature is available for the extension
and has been activated using the Centralized Administration Tool.
8. Click the Access Control tab and select Allow or Deny for a contact depending on whether
you want to provide your presence to that contact.
9. Click OK.
IM and Presence screen field descriptions
Field Name
Description
Enable Instant Messaging and Presence Settings Check box to indicate if instant messaging and
presence functionality is to be used.
Table continues…
Configuring instant messaging and presence settings
April 2015 Implementing Avaya one-X
®
Communicator 23
Comments? infodev@avaya.com
To Next Page
Loading...
