Avaya one-X - Call Display and Redial Settings; Displaying Call Timers and Setting Redial Options

Chapter 5: Configuring the general settings
manually
Configuring telephony settings
Procedure
Click Telephony in the left pane of the General Settings window.
The system displays the settings in the right pane of the General Settings window. This pane
displays different fields depending on whether you select H.323 or SIP protocol after installation.
Telephony screen field descriptions
Field Name (for H.323 protocol)
Description
Extension The extension number of your phone
Password The password for your phone.
Server List The IP address of the Communication Manager
server.
Enable Video Calls The check box to enable video sharing. For this your
administrator must configure your extension on the
server.
Field Name (for SIP protocol) Description
Extension The extension number of your phone.
Password The password for your phone.
Server List The IP address of the proxy server.
Port The port number of the server.
If you do not enter the port number, Avaya one-X
®
Communicator uses port 5061 as the default setting.
Domain The domain of your Avaya Aura
®
Session Manager
server.
Mode The mode of use.
Table continues…
18 Implementing Avaya one-X
®
Communicator April 2015
Comments? infodev@avaya.com