Field Name Description
(such as a hotel room). This mode is configured for
voice over IP (VoIP). Make and handle calls
through the Avaya one-X
®
Communicator interface
on your computer, and use the inbuilt microphone
and speakers of the computer or an externally
connected headset to speak and listen.
• Desk Phone: Using this mode, you can log in to
the server and control your Avaya telephone from
Avaya one-X
®
Communicator. You can make and
handle calls from both the Avaya one-X
®
Communicator interface and your Avaya
telephone. Use your Avaya telephone to speak and
listen. When the connection to the phone is lost
and can’t be established after several attempts, a
warning message is thrown to inform the customer.
• Other Phone: With this mode, you can use the full
feature set of your company telephone system
from a location other than your office. You place
and handle calls through the Avaya one-X
®
Communicator interface, and you use a separate
telephone line at your remote location to speak and
listen. Unlike This Computer mode, this mode is
configured for toll-quality audio and optimizes
audio through the other phone. To use this mode,
you must have a separate telephone line available
at your remote location.
Note:
In the DeskPhone mode and Other Phone
mode, Avaya one-X
®
Communicator does not
display numbers (DTMF) dialed from a hard
phone during an active call.
Enable Emergency Call Handling Feature (For H.
323 protocol only)
Check box to enable Emergency Call Handling.
Your extension number (For H.323 protocol only) Check box to select if you want Avaya one-X
®
Communicator to use your extension number during
an emergency call.
Telephone number (For H.323 protocol only) Check box to select if you want Avaya one-X
®
Communicator to use any other phone during an
emergency call. Use the text field to enter the
telephone number to be used during an emergency
call.
Configuring outgoing call settings
April 2015 Implementing Avaya one-X
®
Communicator 29
Comments? infodev@avaya.com
To Next Page
Loading...
