No. Task Description Notes
with the
Scopia
®
SR
Manager. This
forces the
proper
communication
path to and
from the
Scopia
®
SR
Manager no
matter which IP
the Scopia
®
SR
Manager uses
to
communicate
with the
Scopia
®
SR
device.
7 Register each of the
components with the main
server.
Registering each of the
components on page 34
Physically connecting the new server
Before you begin
You require a keyboard, a mouse, and a monitor. You also require several IP addresses and up to
four category 5e LAN cables. Ensure that you received the following items with your Avaya Scopia
®
Streaming and Recording server (Scopia
®
SR):
• Power cords
• Rack mount kit
Procedure
1. Connect the keyboard, mouse, and monitor.
2. Connect the LAN cable(s).
Scopia
®
SR comes with four 1 Gbit NICs which are bonded. Connect to at least one or all
four. They all respond with a single IP address.
Figure 7: Front and Rear Views on page 20 displays the unit.
Physically connecting the new server
June 2015 Installing the Avaya Scopia
®
Streaming and Recording Server 19
Comments on this document? infodev@avaya.com
To Next Page
Loading...
