Avaya Scopia User Manual

Figure 14: Network Configuration
11. Use the Tab key to highlight Ok and press Enter.
12. On the Select A Device window, use the Tab key to highlight Save and press Enter.
13. Restart Network Services:
a. Right-click on the desktop and select Open in Terminal from the right-click menu
options.
b. In the terminal window, type service network restart.
Next steps
Return to the Licensing checklist on page 24 to see your next task.
Related Links
Licensing checklist on page 24
Setting the IP address of the delivery component (Delivery Node)
A Delivery Node (DN) can be a Virtual Delivery Node (VDN). You should only use a VDN if you
subscribe to the HighWinds Content Delivery Network (CDN). CDN is a cloud-based streaming
system. The delivery component is also called streaming.
Procedure
Use the same set of steps that you used for Setting the IP address of the recording component
(Conference Point) on page 25.
Next steps
Return to the Licensing checklist on page 24 to see your next task.
Related Links
Licensing checklist on page 24
Installing the new streaming and recording server
28 Installing the Avaya Scopia
®
Streaming and Recording Server June 2015
Comments on this document? infodev@avaya.com

Avaya Scopia Specifications

General

Processor	Intel Xeon
Video Resolution	Up to 1080p
Storage	Up to 4 TB HDD
Network Interfaces	Gigabit Ethernet
Operating System	Linux
USB Ports	USB 2.0/3.0
Power Supply	Redundant power supplies
Form Factor	Rack-mountable