Avaya Scopia User Manual

d. Click Enable Services.
e. Under Manage Device, click Configure.
f. Verify that the Manage Registration State is Registered and the Manager Host is the
proper manager IP.
8. (Optional) Verify the registration for the delivery node or virtual delivery node.
a. Type https://<DN IP Address> in a web browser.
b. Log in using the following credentials:
• Username: administrator
• Password: administrator
c. From the menu bar, click Configuration.
d. Verify that the Manage Registration State is Registered and the Network Address is
the proper manager IP.
9. Register the transcoder.
a. Type https://<CP IP Address> in a web browser.
b. Log in using the following credentials:
• Username: administrator
• Password: administrator
c. From the left menu bar, click System Configuration.
d. Click Transcoder Configuration.
e. Enter the IP address of the transcoder and click Finish.
Figure 18: Transcoder Registration
Next steps
Return to the
Installation checklist on page 18 to see your next task.
Related Links
Unregistering each of the components on page 36
Registering each of the components
June 2015 Installing the Avaya Scopia
®
Streaming and Recording Server 35
Comments on this document? infodev@avaya.com

Avaya Scopia Specifications

General

Processor	Intel Xeon
Video Resolution	Up to 1080p
Storage	Up to 4 TB HDD
Network Interfaces	Gigabit Ethernet
Operating System	Linux
USB Ports	USB 2.0/3.0
Power Supply	Redundant power supplies
Form Factor	Rack-mountable