Avaya Scopia User Manual

Figure 20: Conference Point Details
5. Configure the settings, as described in Table 7: Conference Point Details on page 40.
Table 7: Conference Point Details
Field Name Description
Name Enter a name for the conference point.
Version Verify the version and MAC address of the
conference point.
Source DN Select a delivery node. Alternatively, you can
select a delivery node from the Source Group
field.
Source Group Select a delivery node. Alternatively, you can
select a delivery node from the Source DN field.
The Source Group field displays any distribution
groups. A distribution group is a group of delivery
nodes and these groups offer redundancy. If one
of the delivery nodes in a group is not available,
an alternative delivery node from the same group
is selected.
Location Enter a location. The location must match a
location specified for a Scopia
®
MCU in Scopia
®
Management. If you are not specifying locations
in Scopia
®
Management, you can leave it blank.
Gatekeeper IP Enter the IP address for the gatekeeper with
which you plan to register. The gatekeeper must
Table continues…
Configuring components
40 Installing the Avaya Scopia
®
Streaming and Recording Server June 2015
Comments on this document? infodev@avaya.com

Avaya Scopia Specifications

General

Processor	Intel Xeon
Video Resolution	Up to 1080p
Storage	Up to 4 TB HDD
Network Interfaces	Gigabit Ethernet
Operating System	Linux
USB Ports	USB 2.0/3.0
Power Supply	Redundant power supplies
Form Factor	Rack-mountable