Avery Dennison 6405 - Setting the Functional Brake Force

03/10 Rev. 5.04-04 SERVICE MANUAL Service Mechanics
64-xx – 64-xx Dispenser
29
Table below: Brake forces for ribbon unwind and ribbon rewind mandrel.
Printer Tractive force rewind
mandrel
Tractive force unwind
mandrel
Label width
Min. Setting Max. Min. Setting Max.
64-04 1
+1
N 5 N 9
+2
N 1
+1
N 7 N 10
+2
N 105 mm
64-05 1
+1
N 6 N 9
+2
N 1
+1
N 7 N 10
+2
N 140 mm
64-06 1
+1
N 10 N 13
+2
N 1
+1
N 13 N 17
+2
N 155 mm
64-08 1
+1
N 15 N 16
+2
N 1
+1
N 16 N 17
+2
N 250 mm
Setting the functional brake force
With the settings given above, the range that
can actually be set corresponds to the
permissible range for the braking torque.
 Screw the threaded rod in until it stops
then screw it out again by about
2 rotations.