03/10 Rev. 5.04-04 SERVICE MANUAL Service Mechanics
64-xx – 64-xx Dispenser
8
Left front housing
Disassembling/assembly
1. Unscrew the Phillips screws (1).
2. Carefully remove the front housing (2) to
the side.
3. Pull off the flat ribbon cable plug (3) at
the rear of the operating panel. Press
the operating panel from behind out of
the housing.
4. Unscrew the cutter connection (4).
Tools
– Phillips screwdriver
– Socket wrench size 4.5
3
4
1
1
2
To Next Page
Loading...
