03/10 Rev. 5.04-04 SERVICE MANUAL Service Mechanics
64-xx – 64-xx Dispenser
7
Rear hood
Disassembling
The rear hood (2) can be removed by
unscrewing the 6 Phillips screws (1).
Prise off the rear hood somewhat to the
side in order to lift the metal tab (3) out
of its recess and at the same time
remove it with an upward movement.
Assembly
Tighten the screws with 160 Ncm.
Tool
– Phillips screwdriver
1
1
1
2
1 1
1
3
To Next Page
Loading...
