Avery
®
Personal Label Printer
47
4. Click the Label 2 tab. Click Insert Text on the Vertical toolbar to create a text object
on Label 2. Move and resize the text object to fit in the lower half of Label 2.
5. Click inside the text object and type the following text: This text only appears on Label 2.
6. Click each tab and note the text on the Master tab appears on all labels. The text on the
individual labels (Label 1 and Label 2) only appears on that specific label.
Objects placed on the Master tab can only be edited or deleted from the Master tab. Objects
placed on Label 1 and Label 2 can only be edited or deleted from that specific label.
7. Select File > Print. Select All Designed Labels. Under Number of Copies, select Labels
and click Print Preview. Select 100% from the pull-down list box to enlarge the preview.
Label 1 and Label 2 contain both shared and different information. Click Close to return to
the Design screen without printing.
Creating Entirely Different Labels
Next, we will create entirely different labels by using only the Label tabs. To create different
labels using our current project, we will remove the shared text from the Master tab.
1. Continuing the steps above, click the Master tab to select it. Select Edit > Select All to
select all objects on the Master tab. Press the Delete key on the keyboard. The text object is
removed from the Master tab.
To Next Page
Loading...
