Avery
®
Personal Label Printer
46
Creating Labels with Both Identical and Different Information
We will continue the steps above by creating labels that contain both identical (shared) and
different information. So far, we have created identical labels by adding text to the Master tab
only. Next, we will add another label to our project and add different text to Label 1 and
Label 2.
1. Continuing from above, we will add another label. Right-click the Label 1 tab and select
New Label.
A Label 2 tab is added to the Tab Bar and is active. Label 1 represents the first label on the
sheet, Label 2 represents the second label on the sheet.
2. Click the Label 1 tab to select it. Click Insert Text on the Vertical toolbar. A text
object is automatically created. Move and resize the text object to fit in the lower half of
Label 1.
3. Click inside the text object and type the following text: This text only appears on Label 1.
To Next Page
Loading...
