2-18 Loading Supplies & Printing
Printing
Before you print, make sure the printer is connected
to the host with a communication cable.
The communication values at the printer must match
those at the host.
The printer's default communication values are 9600
Baud, 8-bit data frame, 1 stop bit, no parity, and DTR
flow control.
1. Turn on the printer.
2. Download a format and a batch. Refer to the
Packet Reference Manual for information on
downloading print jobs.
3. The printer prints the labels, either in peel mode
or non-peel mode.
4. Remove the printed labels.
To Next Page
Loading...
