Safety Compliance
Safety Statement: (Model #: 9100-65779)
This equipment has been tested to comply with USA, Canadian, EU and International safety certification standards: UL 60950-1 2nd
edition, CAN/CSA C22.2 No. 60950-1-07; 2nd edition, EN 60950-1:2006 /A11, /A1, /A12, /A2 and IEC 60950-1:2005/A1, /A2.
Avid Technology Inc., has been authorized to apply the appropriate NRTL mark on its compliant equipment.
Power Safety Input Rating
Pro Tools | Dock: 12Vdc, 2.5A
Warning
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this equipment near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other equipment (including amplifiers) that produce
heat.
9) Only use attachments/accessories specified by the manufacturer.
10) Only perform the services explicitly described in the install and or user manual. For services or procedures not outlined in the install
or user manual, speak with authorized service personnel.
11) Refer all servicing to qualified service personnel. Servicing is required when the equipment has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the equipment, the equipment has been exposed
to rain or moisture, does not operate normally, or has been dropped.
12) For products that are a Mains powered device:
The power inlet is the main disconnect device and should remain accessible. Disconnect the power cord before servicing the unit.
Protect power cords from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the equipment.
Unplug this equipment during lightning storms or when unused for long periods of time.
Warning! To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
This unit may be provided with a power supply cord set suitable for 120V AC input only (for U.S.A.and Canada). For other than
U.S.A. and Canada, a qualified person must provide for use with this unit, an appropriate, approved power supply cord set which is
in compliance with the end use country requirements and has a minimum cross-sectional area of 1.0mm2.
To Next Page
Loading...
Need help?
General
