Pro Tools | SYNC HD Guide22
Word Clock In/Out
Word Clock In
Receives (1x sample rate) Word
Clock, for clock reference purposes only. Word
Clock is often used with external digital consoles
and digital tape machines.
Word Clock Out
Outputs 1x sample rate Word
Clock information (for Word-clock capable pe-
ripherals) or 256x Super Clock information. This
port is configured using the controls on the front
panel of the SYNC HD.
9-Pin Out 1 and 2
For MachineControl-enabled systems, these two
ports connect directly to external 9-pin transports,
and provide limited Serial Deck control capability.
Only one of these ports can be used at a time.
For best performance on Windows systems, use
the COM ports on the Windows computer.
For best performance on Mac systems, use an
Avid-supported USB serial adapter.
Loop Sync In/Out
Loop Sync is the clock signal used to synchronize
Pro Tools HD interfaces.
Loop Sync In
Receives Loop Sync from any
Pro Tools HD interface.
Loop Sync Out
Provides Loop Sync. This port
connects to the primary Pro Tools HD interface.
AC Power
SYNC HD accepts a standard power cable and is
auto voltage-selecting (100V to 240V).
See the MachineControl Guide for more
information.
To Next Page
Loading...
