MENU FUNCTION
-40-
The submenu items are described below:
1) HDD-MASTER-1
Press “ENTER” to change to the HDD you want if there are more than 1 HDD in your DVR.
2) FULL LIST
Show the time list for all types of the recorded files. The capital letters stand for the following:
R: RECORD / S: SYSTEM / A: ALARM / MS: MOTION / T: TIMER.
3) RECORD LIST
List the time of manual-recorded files.
4) SYSTEM LIST
List the time of system-recorded files.
Under the manual recording mode, the DVR system will save one recorded file every one hour.
5) ALARM LIST
List the time of alarm-trigger-recorded files.
6) MOTION LIST
List the time of motion-trigger-recorded files.
7) EVENT SEARCH
Move the cursor to “EVENT SEARCH”, and you will see a similar screen as the following:
SEARCH
EVENT SEARCH
HDD-MASTER-1 DATE 2006 - AUG - 31 15 : 12 : 03
FULL LIST CHANNEL 01
RECORD LIST EVENT MOTION
SYSTEM LIST SEARCH SELECTED
ALARM LIST
MOTION LIST
EVENT SEARCH
TIME SEARCH
The submenu items are described below:
‧ DATE
Set the date and time you want to search for events.
‧ CHANNEL
Press “＋”or “－” to select the channel.
‧ EVENT
Select the event type: MOTION or ALARM.
‧ SEARCH
You can choose to search only the selected HDD (SELECTED) or all the connected HDDs (ALL HDD) by pressing
“＋”or “－”.
After setting all search criteria, press “ENTER” to start search and directly play if any file is found.
Note: The file found will be played with the fast speed.
To Next Page
Loading...
Need help?
General
