LICENSED SOFTWARE AP
-61-
(5) Timer Record
In “DVR” “Timer Record”, you can schedule up to 7 sets of time for recording.
Note: The same settings can also be made in the DVR. Please refer to the section “6.2 Timer” at page 24 for
details.
5) DATE
Choose a day from “DATE” dropdown menu. The options are OFF, SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI,
SAT-SUN and DAILY.
6) START
Enter the start time of timer recording.
7) END
Enter the end time of timer recording.
Press “APPLY” to confirm the setup, or “EXIT” to quit without saving.
(6) Date
In “DVR” “Date”, you can set the date for your DVR. Please DO NOT change the date or time when the recording
function is activated. For details, please refer to the section “4.1 Recording” at page 18.
Note: The same settings can also be made in the DVR. Please refer to the section “6.3 Date” at page 25 for
details.
To Next Page
Loading...
Need help?
General
