LICENSED SOFTWARE AP
-69-
Enter the user name and password, the same as the ones used at AP login. Press “Submit” when the user name and
password are correct, or “Reset” to re-enter the user name and password.
Step 4: You will see a similar screen as the following when the login information is correct.
All the buttons and their functions on the control panel are the same as the ones on AP control panel except for
the buttons indicated above.
Image Position Setting:
Button Position
LT Upper Left
LD Lower Left
Center Center
RT Upper Right
RD Lower Right
For the information of other buttons, please refer to the section “7.3 Control Panel” at page 47.
To Next Page
Loading...
