Avtech AVH306 - Page 40

MAIN MENU
35
ADVANCED CONFIG
CONNECTION
PUSH VIDEO
PUSH MESSAGE
MESSAGE MAIL
VIDEO MAIL
CAMERA
ACTION ON
DETECTION
EVENT 
ALL
ALERT

VIDEO LOSS
NETWORK

HDD FULL
DISPLAY

POWER ON
RECORD

CLEAR HDD
NOTIFY

NET LOGIN

KEY UNLOCK

NETWORK

UPS

SYSTEM ABNORMAL
EXIT
Step1: Switch “ACTION” to “ON”.
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable “Push Message” in EagleEyes on your mobile device, and try to trigger an alarm event to see
if you’ll get Push Message.
MESSAGE MAIL
Note: For E-mail notifications, make sure you have configured an E-mail account in “NETWORK” 
“E-MAIL” to send the notifications.
Enable this function in “ACTION”, select the event type(s) you want to send notifications in “EVENT”, and add
the E-mail address(es) to which you want to send notifications in “RECEIVER”.
You’ll get an E-mail telling you the occurrence of your selected event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO
PUSH MESSAGE
MESSAGE MAIL
VIDEO MAIL
CAMERA
ACTION ON
DETECTION
EVENT 
ALL
ALERT

VIDEO LOSS
NETWORK

HDD FULL
DISPLAY

POWER ON
RECORD

CLEAR HDD
NOTIFY

NET LOGIN

KEY UNLOCK

NETWORK

UPS

SYSTEM ABNORMAL
RECEIVER SETUP
EXIT
VIDEO MAIL
Note: For E-mail notifications, make sure you have configured an E-mail account in “NETWORK” 
“E-MAIL” to send the notifications.
Enable this function in “E-MAIL ALERT”, and add the E-mail address(es) to which you want to send notifications
in “RECEIVER”.
You’ll get an E-mail telling you the occurrence of motion events attached with a html file.