MAIN MENU
32
6.4.6 DISPLAY
ADVANCED CONFIG
CONNECTION
FULL SCREEN DURATION 03
CAMERA
DISPLAY COVERT ON
DETECTION
HDD DISPLAY MODE SIZE
ALERT
BRIGHTNESS 128
NETWORK
CONTRAST 128
DISPLAY
SATURATION 128
RECORD
NOTIFY
EXIT
1) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
2) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” when covert recording is activated in “CAMERA”.
3) HDD DISPLAY MODE
Select “SIZE” to show the remaining hard disk capacity for recording in GB, or “TIME” to show the remaining
recording time.
4) BRIGHTNESS / CONTRAST / SATURATION
Click the current value to manually adjust the brightness/contrast/saturation/ of the screen.
6.4.7 RECORD
Note: Please DO NOT change the date or time of your NVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all hard disk data, and start recording again.
ADVANCED CONFIG
CONNECTION
MANUAL RECORD OFF
CAMERA
EVENT RECORD ON
DETECTION
TIMER RECORD OFF
ALERT
PRE-ALARM RECORD ON
NETWORK
OVERWRITE ON
DISPLAY
KEEP DATA LIMIT (DAYS) OFF
RECORD
RECORD CONFIG SETUP
NOTIFY
NVR MODE 6CH
EXIT
1) MANUAL RECORD
Set the manual recording function on / off.
2) EVENT RECORD
Set the event recording function on / off.
3) TIMER RECORD
Set the timer recording function on / off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
