AXIS 231D/232D Installation Guide Page 11
ENGLISH
The AXIS Internet Dynamic DNS Service
The AXIS Internet Dynamic DNS Service is a free service provided by Axis, which allows you
to quickly and simply install your camera, which then receives a static name (DNS name) and
a dynamic IP address. More information about the AXIS Internet Dynamic DNS Service is
available at www.axiscam.net
To perform this procedure, your network should have an Internet connection with no HTTP
proxy, and IP addresses should preferably be assigned via DHCP.
Follow these instructions:
1. Connect the AXIS 231D/232D to your local network.
2. Connect the power to the Network Dome Camera.
3. Wait for the Power indicator on the AXIS 231D/232D to show a steady green, whereupon
it will have received a dynamic IP address from a DHCP server on your network.
4. Wait 60 seconds and push the control button on the dome camera once
. The Power
indicator will blink amber while it connects to the AXIS Internet Dynamic DNS service.
When the registration process is complete, the indicator will return to steady green.
5. To complete the installation, now visit www.axiscam.net from an Internet connected
computer. This must be done within 60 minutes of pressing the Control button.
6. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS Service.
You will need the product’s serial number to complete the installation. The serial number
is located on the product label. See also page 12 for instructions on how to set the
password.
Important!
To remove the DNS name and unregister from this service, open the Setup pages in the
AXIS 231D/232D, click System Options > Network > TCP/IP > Basic, click the Settings
button for the AXIS Internet Dynamic DNS Service and finally, click the Remove button.
Please note that this procedure will send the IP address, firmware version, product type and serial number of
the AXIS 231D/232D to the AXIS Internet Dynamic DNS Service. No
personal information is transferred.
To Next Page
Loading...
Need help?
General
