AXIS 231D/232D Installation Guide Page 5
ENGLISH
AXIS 231D/232D Network Dome Camera
Installation Guide
This installation guide provides instructions for installing the AXIS 231D/232D Network Dome
Camera on your network. For all other aspects of using the product, please see the AXIS 231D/
232D User’s Manual, available from www.axis.com
Installation steps
Follow these steps to install the AXIS 231D/232D on your local network (LAN):
1. Check the package contents against the list below.
2. Connect the camera. See page 6 and page 7.
3. Set an IP address. See page 7 for information on the available methods.
4. Set the password. See page 12.
Package contents
Optional accessories are available for mounting on ceiling, wall, corner and pole, for both
indoor and outdoor use. For more information, please visit the Axis Web site:
http://www.axis.com
Before you begin
If the AXIS 231D/232D is to be mounted in a position where it is difficult to access, it is
recommended that you set the IP address and get the camera up and running before
completing the hardware installation.
Item Title/Variants
Network Dome Camera AXIS 231D/232D
Connection Module
Connection Module Cable
Indoor Power Supply with
power cable
Europe
UK
Australia
USA/Japan
Korea
Mounting Kits Hard Ceiling Mount for Indoor Use
Inset Ceiling Mount for Indoor Use
This document AXIS 231D/232D Installation Guide
Warranty Document
The power supply is country
specific, please check that the
type of power supply you are
using is correct.
To Next Page
Loading...
Need help?
General
