Axis ATA1200 - Autozeroing Function (Autotar)

32 USER MANUAL
__________________________________________________________________________________________________________________
17.2 Autozeroing function (AutotAr)
When the function is activated, the scale
automatically ensures stable zero indication if
the pan is empty or if zero indication was
acquired by pressing  T  key.
To turn on the function use MENU key and
using  T  key choose AutotAr and then Aut
on
To leave the function press MENU key, then
choose AutotAr and Aut OFF.
Note:
1. AUt sign occurs only in scales with LCD
display.
2. In scales with active  0  key function
function changes name into AutoZE
(autozeroing) and works only when the scales
is unbiased.
g
0
g