Axis ATA1200 - 18 Special Functions Description

USER MANUAL 39
__________________________________________________________________________________________________________________
18. Special functions description
All scales besides basic metrological functions: weighing and taring, have a set of special functions.
Depending on meter type functions set differs. Below a list of functions available in standard ME-01 type
meters:
 Add id number to product (Prod),
 Add id number to user (USEr),
 pieces counting function (PCS),
 change of mass unit (UnIt),
 percentage weighing function (PErC),
 selecting label number function (LAbEL),
 weighing large animals function (LOC),
 entering tare function (tArE),
 maximum value indication function (UP)
 statistical calculations (StAt)
 paperweight calculation function (PAPEr) – on demand
and functions that require additional equipment to be completely functional:
 options with the clock:
- setting current date and time function (dAtE)
- total weight function (totAL)
 options with the transoptors connectors (WY ):
- checkweighing function (thr)
LabEL function is available in scales with EPL or EPL-A transmission protocol activates (go to
SetuP/SErIAL).