50 USER MANUAL
__________________________________________________________________________________________________________________
To leave the function with clearing total register, select totAL function from menu and choose tot oFF
option. Scale prints the communicate informing about clearing registers.
The form of receipt after each measurement:
Report form:
Note:
When the scale doesn’t have an internal clock, Date and Time do not appear on printout.
Maximum number of measurements is 99 999.
Maximum total load 99 999 000d.
The weighing unit of the total value from the register (Total) is the same as the weighing unit stated on
the keypad or is 1000 times greater, what is signalled by “o” indicator at the left of the display.
If the registered value is too big to be displayed, “E” communicate appears on the display. If the number
of series is too high and cannot be displayed, “Err1”communicate appears on the display
To Next Page
Loading...
