23
Anti-Theft System
This unit is designed with a flip-down detachable panel.
The panel can be detached and taken with you, helping to
deter theft.
Remove the panel
1. Press
PWR
to switch off the power of the unit.
2. Press to flip down the panel.
3. At an angle hold the panel to pull it out.
4. Place the panel into the case and take it with you when you
leave the car.
Install the panel
1. Hold the panel and ensure the panel faces toward you, and
at an angle set the right side of the panel in the panel
bracket.
2. Press the left side of the panel until it locks.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole on the front of the set until they
lock.
3. Pull out the unit.
To Next Page
Loading...
