Remote Controls
Replacing the lithium battery of remote control unit
When the range of the card remote control becomes short or does not function, replace the battery
with a new lithium battery. Make sure the polarity is correct.
1. Pull out the battery holder while pressing the stopper.
2. Insert the button-type battery with the stamped (+) mark facing upward. Insert the battery holder
into the remote control.
Remote control operating range
The remote control can operate within a distance of 3~5m.
Warning
• Store the battery where children cannot reach. If a child accidentally swallows the battery, consult
a doctor immediately.
• Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
• Do not expose or bring into contact the battery with other metallic materials. Doing this may
cause the battery to give off heat, crack or start a fire.
• When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery
may give off heat, crack or start a fire.
To Next Page
Loading...
