Axis AX-905 - Technical Specifications Summary; General, Radio, and Disc Player Specs; Included Components and Notes

25
General
Power supply: 12VDC (11V-16V)
Test voltage 14.4V, negative ground
Maximum power output: 45Wx4 channels
Continuous power output: 25Wx4 channels (4
10% T.H.D.)
Suitable speaker impedance: 4-8ohm
Pre-Amp output voltage: 4.0V (CD play mode: 1KHz, 0dB, 10K load)
Fuse: 15A
Dimensions(WxHxD): 178x50x166mm
Weight: 1.7kg
Aux-in level: 500mV
Sub-out: 2.0V (CD play mode: 61Hz, 0dB, 10K load)
FM Stereo Radio
Frequency range: 87.5-108.0MHz (Europe)
87.5-107.9MHz (America)
Usable sensitivity: 8dB μ
Frequency response: 30Hz-15KHz
Stereo separation: 30dB (1KHz)
Image response ratio: 50dB
IF response ratio: 70dB
Signal/noise ratio: >55dB
AM (MW) Radio
Frequency range 522-1620KHz (Europe)
530-1710KHz (America)
Usable sensitivity(S/N=20dB) 30dBμ
Disc Player
System: Disc digital audio system
Frequency response: 20Hz - 20KHz
Signal/noise ratio: >80dB
Total harmonic distortion: Less than 0.20% (1KHz)
Channel separation: >60dB
Video signal format system: NTSC/PAL 60/PAL/AUTO
Video output: 1 0.2V
Components
Mounting collar ...........................................................................................1
Machine screws M5x6 mm.........................................................................4
M4x6 mm ........................................................................4
Mounting bolt (50 mm) ..............................................................................1
Wire connector ...........................................................................................1
Removable face plate case ........................................................................1
Trim plate ....................................................................................................1
T-key ..........................................................................................................2
Operating Instructions ................................................................................1
Rubber cushion .........................................................................................1
Remote control ...........................................................................................1
Note: Specifications and the design are subject to change without notice due to
improvements in technology.
Specifications