Axis P3344 User Manual

AXIS P3344 Fixed Dome Network Camera
PTZ (Pan Tilt Zoom)
4. Select an available prese t position and click Apply.
6. Specify the View Time in seconds or minutes.
7. Specify the View order or select the Random view order check box option.
8. Click Save .
To modify or remove guard tours, go to PTZ>GuardTour, select the guard tour in the Guard Tour List and click Modify/Remove.
For more information see the online help
.
Advanced
Controls
Panel Shortcut Command Buttons can be co nfigured to provide direct access to commands issued via the VA PIX® Application
Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page through
the Ctrl panel button, see page 11.
Note
Disabling PTZ contro ls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to
preset positions that require a tilt movement.
27

Axis P3344 Specifications

General

Maximum resolution	1280 x 800 pixels
Pan range	0 - 360 °
Tilt angle range	0 - 170 °
Angle of rotation	340 °
Camera shutter speed	1/25000 - 1/6 s
Minimum illumination	0.4 lx
Sensor type	CMOS
Optical sensor size	1/4 \
Focal length range	3.3 - 12 mm
Video motion detection	Yes
Power source type	PoE
I/O ports	RJ-45
Dimensions (WxDxH)	96 x 96 x 148 mm
Processor model	ARTPEC-3
Flash memory	128 MB
Supported network protocols	IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS.
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	445 g